SlipGrip Heavy Duty Anti Slip Stair Tread Covers
SlipGrip Heavy Duty Anti Slip Stair Tread Covers are a long-lasting and highly durable solution to your slippery stairs. Ideal for high traffic areas.
Stock Code:SGSTF600W
Your Product Has Been Added
Other Products You May Be Interested In ...
- Description
- Case Studies
- How To Apply
- Specifications
- Video
- You may be interested in
- Alternatives
- Delivery
Why Choose SlipGrip Heavy Duty Anti Slip Stair Tread Covers?
- Long lasting anti slip - our stair tread covers are produced using our own ExtremeCore® grit, which is twice as hard wearing as the industry standard quartz. Their 55mm x 55mm contrasting nosing also makes them Building Regulation and Disability Discrimination Act compliant.
- Extremely durable - the low profile fibreglass construction is produced by the pultrusion method which means they will not bend, warp or split over time.
- Suitable for - a variety of substrates including wood, metal and concrete stairs.
- Chemical resistant - in addition to being non slip, SlipGrip is also chemical resistant providing the perfect solution for potentially hazardous areas.
- Minimal downtime - our extreme core non-slip stair treads can be walked on immediately and fitted with ease keeping downtime to a minimum.
- FibreGrid offer a cut-to-size service if the stock sizes aren't suitable for you. For more information or to place your bespoke order, please call 01440 712722.
| Standard | Heavy Duty | |
| Grit Type: | Standard | ExtremeCore® |
| MOHS Hardness Scale: | 7 | 9 |
| Suitable For: | Industrial and Commercial Premises | Areas of Heavy Traffic |
| PTV Test Reading Dry: | 71 | 76 |
| PTV Test Reading Wet: | 63 | 70 |
| Traffic Level: | Medium | Heavy |
| Prices From: | £10.83 | £15.91 |
| Sheet Thickness: | 4-5mm with grit | 5-7mm with grit |
| Guarantee: | 3 Years | 10 Years |
How to Install
-
You can install our SlipGrip Heavy Duty Anti Slip Stair Tread Covers easily and quickly with our SlipGrip Stair Tread Cover Fixing Kits. 1 fixing kit covers 3 metres of stair tread cover.
Measuring
-
Refer to the diagram in image 4 above for instructions on how to measure your stairs appropriately.
Preparation
-
Ensure that the area is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface. You can patch repair concrete with our SlipGrip Step Edge Repair.
-
Dry fit stair tread covers to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.
-
Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.
Fixing Kit Application
-
Apply an approx. 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the stair tread covers approx. 25mm in from the edges. Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a ‘peak and a trough’, repeat this until you reach the end.
-
Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions.
-
Drill two holes on each side of the SlipGrip stair tread cover, the first approximately 60mm in from the back edge and 50mm from the side. The second one should again be approximately 50mm from the side and approx. 60mm back from the contrasting nosing (55mm) For larger treads, it may be necessary to have further fixing points in the centre of the tread.
Pendulum Slip Test Results Coarse Grade
Pendulum Slip Test Results Fine Grade
ASTM D 635-15 Fire Test Report
Sizes
- Lengths: 600mm, 750mm, 800mm, 1000mm, 1200mm, 1500mm, 2000mm or 3000mm
- Profile: 345mm depth x 55mm nosing
- Grades: Fine and Coarse
- Thickness: 5-6mm with grit
Colours
- Black with yellow nosing
- Black with white nosing
- Grey with white nosing
- Grey with yellow nosing
- Stone with stone nosing
Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.
| Order Value | United Kingdom Mainland |
| £100 and under | £9.95 |
| £100.01 to £300 | £16.00 |
| £300.01 to £500 | £25.00 |
| £500.01 to £750 | £35.00 |
| £750.01 to £1000 | £42.00 |
| £1001.01 to £1500 | £52.00 |
| £1500.01 to £2000 | £67.00 |
| £2000.01 to £3000 | £95.00 |
| £3000.01 to £4000 | £120.00 |
| £4000.01 and over | £300.00 |
| Order Value | Highlands and Islands* |
| £100 and under | £45.00 |
| £100.01 to £500 | £100.00 |
| £500.01 to £1000 | £200.00 |
| £1000.01 to £3000 | £280.00 |
| £3000.01 and over | £300.00 |
| Order Value | Europe Zone 1 & Northern Ireland** |
| £100 and under | £45.00 |
| £100.01 to £3000 | £150.00 |
| £3000.01 to £6000 | £250.00 |
| £6000.01 and over | Please call 01440 712722 for a bespoke quote. |
* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.
