Some of our products are unavailable to order online due to courier service problems.

Please get in touch via phone or email if you wish to place an order for these products.

EdgeGrip Heavy Duty Anti Slip GRP Stair Nosings

EdgeGrip Heavy Duty Anti Slip GRP Stair Nosings are a long-lasting and highly durable fibreglass (GRP) anti slip stair nosing. Two grades are available for internal and external application.

Stock Code:EG600I70Y

Why Choose EdgeGrip Heavy Duty Anti Slip GRP Stair Nosings?


  • Extremely heavy duty - our EdgeGrip heavy duty stair nosings incorporate a unique ExtremeCore® ceramic grit measuring a tough 9 on the MOHs hardness scale (diamond is 10), meaning they are twice as durable as standard quartz nosings. This means they are suitable for extreme traffic conditions, and will last for years.
  • Long lasting anti slip - the grit is embedded in a specially pultruded GRP profile, meaning it is resistant to swellling, stretching or warping over a wide range of temperatures and physical stresses.
  • The 55mm contrasted coloured nosing also makes them Building Regulation and Disability Discrimination Act Part III compliant (in particular, the sections relevant to the partially sighted).
  • Its chamfered edge means it can be fitted to virtually any step without creating a trip hazard. Even when fitted to landings and extra deep steps, it's unique design provides the most secure solution.


  Standard  Heavy Duty
Grit Type: Standard ExtremeCore®
MOHS Hardness Scale: 7 9
Ideal For: Commercial premises Industrial premises
PTV Test Reading Dry: 71 76
PTV Test Reading Wet: 63 70
Traffic Level: Medium Heavy
Prices From: £5.72 £10.20
Thickness: 3mm with grit 3mm with grit
Guarantee: 5 Years 10 Years

How to Install



  • Ensure that the area is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface. You can patch repair concrete with our SlipGrip Step Edge Repair.

  • Dry fit stair nosings to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

  • Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.


Fixing Kit Application

  • Apply an 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the stair nosings approx. 15mm in from the edges. If you are fixing your nosing to carpet or similar material - you can skip the adhesive section of application. The adhesive is best applied using a skeleton gun.

  • Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions.

  • Drill two holes on each side of the top surface in the centre (grit surface), approximately 50mm in from the side, then approximately every 400-500mm. Dependant on the substrate it may be necessary to increase or decrease this spacing. For larger nosings, it may be necessary to have further fixing points in the centre of the tread. Pre-drilling the holes before drilling into the substrate is recommended.

Technical Data Sheet

Mechanical Data Sheet

Pendulum Slip Test Results Coarse Grade

Pendulum Slip Test Results Fine Grade




  • Lengths: 600mm, 750mm, 800mm, 1000mm, 1200mm, 1500mm, 2000mm or 3000mm
  • Profiles: 55mm x 55mm or 70mm x 30mm
  • Grades: Coarse (for external applications) and Fine (for internal applications)
  • Thickness: 3mm with grit


  • Yellow
  • White
  • Black
  • For bespoke colours please call 01440 712722.

Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.


Order Value United Kingdom Mainland
£100 and under £9.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £35.00
£750.01 to £1000 £42.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £45.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £45.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.


* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.