Some of our products are unavailable to order online due to courier service problems.

Please get in touch via phone or email if you wish to place an order for these products.

Rapid Set Concrete Repair Mortar - Cold Cure

Our Rapid Set Concrete Floor Repair Mortar - Cold Cure is a cementitious rapid setting concrete repair mortar, ideal for application in low temperature areas.

Stock Code:04N300ZZ1025

Why Choose Rapid Set Epoxy Concrete Floor Repair Mortar - Cold Cure?


  • Can be applied in temperatures as low as 3°C.
  • Excellent adhesion to concrete, stone, asphalt and metal.
  • Resistant to a wide range of chemicals, and is tolerant to road salts and freeze-thaw.
  • Quick and easy to apply - no need for primer, with high early strength development.
  • Ideal for - repair of worn and damaged steps and floors in cold weather conditions or refrigerated areas.

Surface Preparation

  • All surfaces should be clean and free from oil, grease, chemical contamination, free standing water, old paint, dust and loose debris. Laitance must be removed by scarifying. Thoroughly moisten surface but ensure no free water remains.


Mixing & Placement

  • Rapid Set Concrete Floor Repair Mortar - Cold Cure should be mixed using a forced action mixer.

  • The mixing drum should be pre-wetted and any remaining water drained away. Add the water to the mixing drum and gradually add all of the powder component whilst the drum is turning.

  • Continue mixing for two minutes to produce a hydrated and cohesive mortar which is ready for immediate use.

  • Place the mixed mortar to the desired thickness, allowing for compaction and bed the component. Finish as required and clean all equipment immediately with water.



  • Once mixed, the Rapid Set Concrete Floor Repair Mortar should be applied by either a steel trowel or float, working the mortar into the substrate to ensure maximum distribution of the resin/hardener. The surface can then be brought to the required finish using a steel float after the mortar has been well compacted.

  • Finishing is simplified by wiping of the trowel face using a cloth dampened with a solvent based antibacterial cleaner. On thicker sections the material should be compacted in layers, not exceeding 25mm.

  • All tools and equipment should be cleaned immediately using a solvent based antibacterial cleaner.

Technical Data Sheet




  • Tub Size: 25kg
  • Coverage: 1.2m² per 25kg (at approx. 10mm thickness)
  • Recommended Thickness Application: 10mm
  • Working Cure Time: 10 - 15 minutes

Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.


Order Value United Kingdom Mainland
£100 and under £9.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £35.00
£750.01 to £1000 £42.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £45.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £45.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.


* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.