Some of our products are unavailable to order online due to courier service problems.

Please get in touch via phone or email if you wish to place an order for these products.

Rapid Set Epoxy Concrete Floor Repair Mortar

Our Rapid Set Concrete Floor Repair Mortar is a heavy duty epoxy mortar which has been formulated to enable the rapid repair of concrete surfaces.

Stock Code:03N210ZZ2025

Why Choose Rapid Set Epoxy Concrete Floor Repair Mortar?


  • Excellent adhesion to concrete, stone, asphalt and metal.
  • Resistant to a wide range of chemicals, and is tolerant to road salts and freeze-thaw.
  • Quick and easy to apply - no need for primer, with high early strength development.
  • Ideal for - repair of worn and damaged steps and floors, spalled expansion joints and runways.

Surface Preparation

  • All surfaces should be clean, free from oil, grease and chemical contamination, free standing water, old paint and loose debris. Oil and grease should be removed. A stronger repair will result if the edges are cut straight with a chisel, angle grinder or similar tool. Steel should be grit blasted or mechanically abraded to a clean bright finish.



  • This should be carried out using a hand held drill & whisk.

  • The base and hardener components should be thoroughly mixed in the base container. In cold conditions, it will greatly aid mixing if the materials are stored in warm conditions.

  • Once the base and hardener are thoroughly mixed they should be transferred to a bucket and the aggregate added slowly. Mix thoroughly for 3-4 minutes until a homogenous mix is obtained.



  • Once mixed, the Rapid Set Concrete Floor Repair Mortar should be applied by either a steel trowel or float, working the mortar into the substrate to ensure maximum distribution of the resin/hardener. The surface can then be brought to the required finish using a steel float after the mortar has been well compacted.

  • Finishing is simplified by wiping of the trowel face using a cloth dampened with a solvent based antibacterial cleaner. On thicker sections the material should be compacted in layers, not exceeding 25mm.

  • All tools and equipment should be cleaned immediately using a solvent based antibacterial cleaner.

Technical Data Sheet




  • Tub Size: 5kg or 25kg
  • Coverage: 0.5m² per 5kg (at approx. 5mm depth)
  • Recommended Thickness Application: 5mm
  • Working Cure Time: 45 minutes

Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.


Order Value United Kingdom Mainland
£100 and under £9.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £35.00
£750.01 to £1000 £42.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £45.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £45.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.


* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.