SlipGrip Heavy Duty Anti Slip Paint is a tough epoxy resin formulation for heavily trafficked areas or if you need built-in chemical resistance.
Stock Code:SGHDP5LLG - BOM
Why Choose SlipGrip Heavy Duty Anti Slip Floor Paint?
How to Apply
SlipGrip Standard Anti Slip Floor Paint is best applied using our 12" Roller, our 5" Paint Brush, and our Paint Scuttle.
Alternatively, you can purchase our Premium Paint Bundle, which will give you everything you need to complete the job, as well as save you 20% on purchasing the products separately.
Preparation
Ensure the surface is clean, dry, and free from wax, oil, food residue or any other substance likely to affect the application of the paint. Grease and oil should be removed with our SlipGrip Standard Degreaser.
Previously painted surfaces should be roughened slightly using sanding material. New concrete should be left at least 28 days before applying the paint.
No primer is required, however if you are applying to concrete, and you feel the surface needs a more smooth, porous key, you can apply our SlipGrip Concrete Keying Etchant to neutralise any remaining alkalinity in the cement and to remove further dirt and laitance (weak, dusty cement particles).
For best results, the floor temperature should be at least 15°C. We do not recommend this product for use on metal or latex levellers.
We also recommend patch testing a small trial area first in areas where appearance is critical.
Application
Remove the two inner tins from the outer tin. Stir the contents of both inner tins well with our Paint Mixer, and then decant the contents of both inner tins into the outer tin. Then, using the Paint Mixer, mix the new contents of the outer tin thoroughly.
Pour the contents into the paint scuttle, and submerge your roller into the scuttle, generously coating before applying your first coat to the surface. If you are painting an entire room, it's recommended you start at the edges first using a paint brush. Stir the paint intermittently so that the mixture stays consistent.
Avoid applying the paint too thickly. Do not exceed 15m² per coat. Your first coat will take approximately 12 hours to dry (in a temperature of 15°), before it's ready for the next coat.
Following your second coat, ensure the paint is hard dry (not just touch dry) before bringing the area back into use. This should take another 12 hours in normal conditions, however can take up to 36 hours in unusual circumstances.
Safety Data Sheet - Heavy Duty Anti Slip Paint - Curing Agent
Safety Data Sheet - Heavy Duty Anti Slip Paint - Resin
Sizes
Colours
Pendulum Slip Test Values
Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.
Order Value | United Kingdom Mainland |
£100 and under | £9.95 |
£100.01 to £300 | £16.00 |
£300.01 to £500 | £25.00 |
£500.01 to £750 | £35.00 |
£750.01 to £1000 | £42.00 |
£1001.01 to £1500 | £52.00 |
£1500.01 to £2000 | £67.00 |
£2000.01 to £3000 | £95.00 |
£3000.01 to £4000 | £120.00 |
£4000.01 and over | £300.00 |
Order Value | Highlands and Islands* |
£100 and under | £45.00 |
£100.01 to £500 | £100.00 |
£500.01 to £1000 | £200.00 |
£1000.01 to £3000 | £280.00 |
£3000.01 and over | £300.00 |
Order Value | Europe Zone 1 & Northern Ireland** |
£100 and under | £45.00 |
£100.01 to £3000 | £150.00 |
£3000.01 to £6000 | £250.00 |
£6000.01 and over | Please call 01440 712722 for a bespoke quote. |
* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.