May 2021 Question

Which grating elevation product should I use?

We now stock Grating Elevation Feet in a wide range of sizes to suit your elevation needs. We also offer ‘slope correctors’ for our Pedestal range for elevating grating where the ground below is not level. Some of our Pedestal Feet come with slope correctors integrated, and you can buy the slope correctors individually for those that don’t.

The slope corrector fits easily on the top of the pedestal foot and provides slope correction from 0-5% (in 0.5% increments).

If you require a slope corrector; note that fitting it adds 9mm to the height of the pedestal (this only applies to the pedestals that don’t come with the slope corrector integrated).

Our Grating Feet currently range from 6mm to 740mm in height elevation.

Non-Adjustable Grating Feet

Elevated Grating Feet - 6mm

These Elevated Grating Feet offer a fixed 6mm of height elevation.

Suitable for elevating our 38mm x 38mm Standard & Heavy Duty Square Mesh Grating to allow forthe free flow of spillages or rainwater under the grating.

The inserts can also be used for creating deflection; thus reducing leg fatigue caused by standing on a hard, inflexible surface for long periods.

This 6mm Grating Foot fits straight into the grating and is ready to use.

Purchase online now for £0.95 each ex VAT.

Rubber Grating Feet

Our Rubber Grating Feet offer 10mm elevation for our GRP Grating.

Suitable for our Standard & Heavy Duty FibreGrating, Mini Mesh (30mm height only) and Solid Top Grating.

These feet allow for the free flow of spillages or rainwater under the grating.

The inserts can also be used for creating deflection; thus recuding leg fatigue caused by standing on a hard, inflexible surface for long periods.

This pushes straight into the grating and is ready to use.

Purchase online now for £1.25 each ex VAT.

DPH0 – 17mm & DPH1 – 28mm

The DPH0 provides a fixed 17mm of elevation, and the DPH1 provides 28mm; both without an integrated slope corrector.

You can purchase the PH5 slope corrector separately for £1.36 ex VAT.

Fitting the slope corrector will add 9mm to the elevation and provide 0-5% slope correction (in 0.5% increments).

Purchase online now from £0.85 ex VAT per pedestal.

Adjustable Grating Feet

Adjustable Elevated Grating Feet: 10mm - 70mm

Our adjustable counterpart for the 6mm Elevated Grating Feet, this offers an elevation range of 10mm to 70mm.

You must purchase and screw on the 'elevation insert' (available on the product page for £0.79 ex VAT) before pushing into the grating.

These Grating Feet are available to purchase now online from £2.20 each ex VAT.

DPH2 & DPH3 Pedestal Feet – 35mm-78mm

The DPH2 provides an adjustable elevation range between 35mm and 53mm, and the DPH3 provides an adjustable elevation range between 50mm and 78mm; both without an integrated slope corrector.

You can purchase the PH5 slope corrector separately for £1.36 ex VAT.

Fitting the slope corrector will add 9mm to the elevation and 0-5% slope correction (in 0.5% increments).

Suitable for our GRP Grating and can support loads of more than 1000kg per pedestal.

These pedestals allow for simple, fast removal of rainwater via access cavity. For good levels of water run-off, purchase our slope corrector and set to a minimum slope of 2%.

Purchase online now from £3.32 ex VAT per pedestal.

Adjustable Pedestal Feet with Integrated Slope Correction

DPH2/PH5 to DPH10 Range – 44mm-740mm

Our Adjustable Pedestals with Integrated Slope Corrector collection has an impressive range of sizes.

Offering the same great benefits of using our other Pedestal Feet, with a greater elevation span and built-in slope correction capabilities.

Our slope correctors can be set to “0”, meaning the surface of the pedestal remains flat.

Purchase online now from £4.56 ex VAT per pedestal.

Shop our FibreGrating Online Today