Some of our products are unavailable to order online due to courier service problems.

Please get in touch via phone or email if you wish to place an order for these products.

Speed Bumps Bundle Packs For 10mph Zones

This premium speed bump kit gives you everything you need to install a highly durable speed bump in your area.

Stock Code:SBBPK2000 - BOM

Why Choose FibreGrid's Speed Bumps Bundle Packs For 10mph Zones?


  • Extremely hard-wearing - made from 100% recycled heavy duty PVC and designed to withstand high amounts of vehicle traffic.
  • Suitable for 10mph zones, and can carry a maximum load of 40 tonnes. Each speed bump bundle comprises a mid-section and two end caps.
  • Easy to fit - comes with pre-moulded fixing holes and fixings included.
  • Ideal for housing estates, schools, hospitals, factory and other car parks, construction sites and anywhere where speeding could cause accidents.
  • Contrasting colours and cats eye reflectors for extra visibility.
  • If you are looking for lengths different to those above, you can purchase our Speed Bumps Parts instead.

How To Apply

  • Speed Bumps are applied by drilling through pre-moulded fixing holds directly into the substrate. Bolts and nylon sleeves are included.


Surface Preparation

  • Ensure the surface is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.

  • Dry fit all speed bump parts to ensure they fit freely and that they sit flat down on the surface.


Speed Bump Positioning

  • In order to maximise the life of your speed bumps, vehicles should drive over the product in a straight line. Vehicles turning on the speed bump will likely cause discomfort to the driver and passengers and may also damage the speed bump and fixings.

  • Speed bumps should be set back from junctions, to reduce vehicles stalling when pulling away. The exact position will vary from application to application but the position should be far enough away so that the vehicle would be in a rolling straight motion at the point of crossing the speed bumps.



  • Position speed bumps in place on the substrate. Then drill down through the speed bumps pre-made holes into the substrate. Alternatively, for a cleaner drill - you can mark our the positions of the holes instead, move the speed bumps out the way, and drill through marked holes.

  • Finally, insert the fixings into the hole and secure the speed bumps in place.

Technical Data Sheet



Mid Section Sizes

  • Length: 500mm
  • Width: 345mm
  • Height: 50mm
  • Weight: 6.5kg

End Cap Sizes

  • Length: 250mm
  • Width: 345mm
  • Height: 50mm
  • Weight: 2.4kg

Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.


Order Value United Kingdom Mainland
£100 and under £9.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £35.00
£750.01 to £1000 £42.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £45.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £45.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.


* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.