EdgeGrip Standard Anti Slip GRP Stair Nosings
EdgeGrip Standard Anti Slip GRP Stair Nosings are a cost effective and highly durable anti slip GRP stair nosing.
Stock Code:EGSD600Y55
Your Product Has Been Added
Other Products You May Be Interested In ...
- Description
- Case Studies
- How To Apply
- Specifications
- Video
- You may be interested in
- Alternatives
- Delivery
Why Choose EdgeGrip Standard Anti Slip GRP Stair Nosings?
- Affordable solution - our standard stair nosings start at just £5.15 per stair nosing making them suitable for all budgets.
- Quick installation - drill down with mechanical fixings and you're good to go. Minimal downtime and can be walked on immediately.
- Durable and tough - made from fibreglass GRP through the pultrusion process, our Standard Nosings are resistant to swelling, stretching or warping over a wide range of temperatures and physical stresses.
- Anti slip top surface - our silicon quartz grit provides excellent anti slip properties providing increased safety on steps and stairs and the high contrasting colour aids visibility. The chamfered back edge also provides additional security to your stairs.
- Their 55mm contrasted nosing also makes them Building Regulation and Disability Discrimination Act compliant.
- Installs over virtually any substrate.
- 5 Year Guarantee against breakage.
| Standard | Heavy Duty | |
| Grit Type: | Standard | ExtremeCore® |
| MOHS Hardness Scale: | 7 | 9 |
| Ideal For: | Commercial premises | Industrial premises |
| PTV Test Reading Dry: | 71 | 76 |
| PTV Test Reading Wet: | 63 | 70 |
| Pedestrian Traffic Level: | Light - Medium | Heavy |
| Prices From: | £5.72 | £10.20 |
| Thickness: | 3mm with grit | 3mm with grit |
| Guarantee: | 5 Years | 10 Years |
How to Install
-
You can install our EdgeGrip Standard Anti Slip GRP Stair Nosing easily and quickly with our EdgeGrip Standard Anti Slip GRP Stair Nosing Fixing Kits. 1 fixing kit covers 5 x 3000mm of stair nosing.
Preparation
-
Ensure that the area is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface. You can patch repair concrete with our SlipGrip Step Edge Repair.
-
Dry fit stair nosings to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.
-
Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.
Fixing Kit Application
-
Apply an 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the stair nosings approx. 15mm in from the edges. If you are fixing your nosing to carpet or similar material - you can skip the adhesive section of application. The adhesive is best applied using a skeleton gun.
-
Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions.
-
Drill two holes on each side of the top surface in the centre (grit surface), approximately 50mm in from the side, then approximately every 400-500mm. Dependant on the substrate it may be necessary to increase or decrease this spacing. For larger nosings, it may be necessary to have further fixing points in the centre of the tread. Pre-drilling the holes before drilling into the substrate is recommended.
Sizes
- Lengths: 600mm, 750mm, 800mm, 1000mm, 1200mm, 1500mm, 2000mm or 3000mm
- Profile: 55mm x 55mm or 70mm x 30mm
- Thickness: 3mm with grit
Colours
- Yellow. For bespoke colours please call 01440 712722. (Subject to minimum rung)
Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.
| Order Value | United Kingdom Mainland |
| £100 and under | £9.95 |
| £100.01 to £300 | £16.00 |
| £300.01 to £500 | £25.00 |
| £500.01 to £750 | £35.00 |
| £750.01 to £1000 | £42.00 |
| £1001.01 to £1500 | £52.00 |
| £1500.01 to £2000 | £67.00 |
| £2000.01 to £3000 | £95.00 |
| £3000.01 to £4000 | £120.00 |
| £4000.01 and over | £300.00 |
| Order Value | Highlands and Islands* |
| £100 and under | £45.00 |
| £100.01 to £500 | £100.00 |
| £500.01 to £1000 | £200.00 |
| £1000.01 to £3000 | £280.00 |
| £3000.01 and over | £300.00 |
| Order Value | Europe Zone 1 & Northern Ireland** |
| £100 and under | £45.00 |
| £100.01 to £3000 | £150.00 |
| £3000.01 to £6000 | £250.00 |
| £6000.01 and over | Please call 01440 712722 for a bespoke quote. |
* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.
